Track Lighting System black, Accessories for tracks Trinity, 17 cm

The Accessories for tracks Trinity component by Maytoni is a black X connector for three-circuit track lighting systems. Its function is to create a connection point between several track sections, providing an orderly solution for linear or branched layouts according to the room arrangement.

Made of plastic with a black finish, it integrates with the Trinity system while maintaining a technical, uniform appearance. It completes a track lighting system when the installation geometry requires an intersection between four directions. This component is not a lamp and does not produce light independently: its role concerns system continuity and organisation.

Its dimensions are approximately 16.6 x 16.6 cm, with a height of 3.2 cm. This projection should be considered when planning the route and positioning connected elements, especially where the track crosses central ceiling areas or spaces where the layout must follow several axes.

The connector can be used in residential, commercial or professional settings where a Trinity three-circuit system is planned. It suits projects requiring modular distribution of light points, such as large living rooms, kitchens with an island, showrooms, shops and workspaces. The black finish matches tracks and fittings in the same colour, helping create a visually coherent composition.

Before installation, plan the complete route and check the connector position in relation to the other system components. This makes the X connection an integral part of a functional, clear and easy-to-organise configuration.

The Maytoni Relax spotlight works with a 48V magnetic track system and provides a compact way to arrange lighting with precision and flexibility. Its black finish and clean profile suit contemporary layouts where the light point should complement the architecture without making the ceiling feel heavy.

With a diameter of 15 cm and a height of 7 cm, the product keeps compact proportions and can be used in modular lighting configurations. The 120° distribution widens the illuminated area, making the spotlight suitable for general or supporting light depending on the arrangement of the other elements on the track.

Light that follows the needs of the space

The colour temperature can be adjusted from 2700 to 6000 K, allowing you to move from a warm, welcoming tone to a more neutral and brighter light and choose the setting that suits the time of day or the function of the space. The 5 W power supports focused use, while the dimming function allows further adjustment of light intensity.

Relax suits spaces where the lighting configuration needs to change over time: living rooms, dining areas, kitchens, studies, commercial spaces and display areas. Integration with the magnetic track system allows you to plan several light points and rearrange them according to the furnishings or activity. Bluetooth Mesh control expands the management options compatible with the system, making light adjustment more practical.

Usage advice

Accessory for the Relax series, made of aluminium: it is compatible with products from the same series indicated by the manufacturer. Install the fitting while switched off and, where an electrical connection is involved, with the power supply disconnected.

Cleaning and maintenance

Carry out every intervention with the power switched off; use a soft cloth for dust. Do not use acidic or abrasive products on the metal, as they can damage the finish.

This is a plastic accessory from the Accessories for tracks Trinity series: it must be paired with products from the same series and manufacturer, with compatibility checked in the technical data sheet. Install with the power switched off, following the manufacturer's instructions; where electrical connections are required, they must be carried out by an electrician.

The Maytoni Relax spotlight works with a 48V magnetic track system and provides a compact way to arrange lighting with precision and flexibility. Its black finish and clean profile suit contemporary layouts where the light point should complement the architecture without making the ceiling feel heavy.

With a diameter of 15 cm and a height of 7 cm, the product keeps compact proportions and can be used in modular lighting configurations. The 120° distribution widens the illuminated area, making the spotlight suitable for general or supporting light depending on the arrangement of the other elements on the track.

Light that follows the needs of the space

The colour temperature can be adjusted from 2700 to 6000 K, allowing you to move from a warm, welcoming tone to a more neutral and brighter light and choose the setting that suits the time of day or the function of the space. The 5 W power supports focused use, while the dimming function allows further adjustment of light intensity.

Relax suits spaces where the lighting configuration needs to change over time: living rooms, dining areas, kitchens, studies, commercial spaces and display areas. Integration with the magnetic track system allows you to plan several light points and rearrange them according to the furnishings or activity. Bluetooth Mesh control expands the management options compatible with the system, making light adjustment more practical.

Usage advice

Accessory for the Relax series, made of aluminium: it is compatible with products from the same series indicated by the manufacturer. Install the fitting while switched off and, where an electrical connection is involved, with the power supply disconnected.

Cleaning and maintenance

Carry out every intervention with the power switched off; use a soft cloth for dust. Do not use acidic or abrasive products on the metal, as they can damage the finish.

Clean with the power switched off, using a soft, dry or slightly damp cloth. Clean a polycarbonate or acrylic diffuser with a damp cloth and mild soap: do not use alcohol or solvents, as they can make it cloudy.

Frequently asked questions

How does this component integrate into a Trinity three-circuit track installation?

The X connector joins four system directions and should be positioned where the track route needs to branch along several axes. Before installation, it is useful to define the complete route and available space.

What are the dimensions of the Accessories for tracks Trinity X connector?

The component measures approximately 16.6 x 16.6 cm and is 3.2 cm high. These dimensions should be considered when arranging the track and connected fittings.

Does this product illuminate the room?

No. It is a connection component for a three-circuit track system, not a light fitting. Light is produced by the fittings installed on the track.