Salvia brown ceiling light 15 cm TK Lighting

A compact flush ceiling light with cognac glass

The Salvia flush ceiling light by TK Lighting brings a modern, measured presence to the ceiling. The brown body combines with cognac-coloured glass, creating a warm look that works easily with wooden furniture, neutral finishes and contemporary interiors. The compact fitting measures 15 cm in width, 17 cm in height and 15 cm in depth: a useful proportion when you need a small ceiling light without giving up a recognisable decorative detail.

The glass diffuser and frame made from painted steel and plastic create a ceiling fitting that supports a room’s general lighting. Cognac-coloured glass adds a soft colour note, while the brown finish works with modern, pared-back interiors or furnishings inspired by natural materials. Salvia can be used in a living room, bedroom, entrance hall or corridor, especially where a compact ceiling solution is required.

The flush ceiling light takes one bulb with an E14 cap, up to a maximum of 10 W LED. The bulb is not included, so you can choose it according to the colour temperature and amount of light required: colour temperature, luminous flux and the final lighting effect depend on the model fitted. Dimming also depends on compatibility between the bulb and the dimming system.

Connection is provided at 230 V - 50 Hz. For installation, the base measures 8 cm in diameter and 3 cm in height; the spacing between the fixing holes is 37 mm. Before installation, check the position of the connections and have the work carried out by a qualified professional. With IP20 protection, Salvia is intended for indoor use.

Usage advice

It mounts flush to the ceiling and suits rooms with low ceilings or spaces where you need diffuse light without taking up room. The IP20 protection rating means it is intended for dry indoor areas. It takes a bulb with an E14 cap, up to max 10 W per bulb: an LED bulb provides good light while using little energy. Bulbs are not included and must be purchased separately. It is dimmable: dimmable bulbs and a compatible dimmer are required to adjust the light level. Make the electrical connection with the power switched off; if you are unsure, contact an installer.

Cleaning and maintenance

Always clean the light when it is switched off and cool, with the power disconnected. Clean the glass parts with a soft cloth and, if needed, glass cleaner applied to the cloth, never directly to the light. Dust the metal with a dry cloth; avoid acidic or abrasive products that can damage the finish. Clean plastic or acrylic parts with a damp cloth and mild soap: do not use alcohol or solvents, as they can make the surface cloudy. To change a bulb, wait until it has cooled and do not exceed the maximum power shown on the label.

Frequently asked questions

What measurements do I need to allow for when installing the Salvia flush ceiling light?

The flush ceiling light measures 15 x 17 x 15 cm. The fixing base has a diameter of 8 cm and a height of 3 cm, while the spacing between the mounting holes is 37 mm. Check the position of the electrical connections before fixing it in place.

Which bulb can I use with the Salvia flush ceiling light?

The flush ceiling light uses one bulb with an E14 cap, up to a maximum of 10 W LED. The bulb is not included. The colour temperature, luminous flux and dimming capability depend on the chosen model and its compatibility.

Which room can it be used in and what type of light does it provide?

Salvia suits indoor spaces such as living rooms, bedrooms, entrance halls and corridors. The cognac-coloured glass contributes to the fitting’s visual effect, while the colour temperature and amount of light depend on the E14 bulb fitted.