Outdoor wall luminaire Bowery black 11 cm width 14.5 cm depth Maytoni

The Bowery outdoor wall light by Maytoni is a compact solution for lighting walls, entrances and outdoor areas with a clean, well-defined light point. The black finish gives it a restrained look that is easy to coordinate with façades, fences, porches and contemporary architecture.

The aluminium body is finished with powder coating and sealed protective glass. This combination helps protect the light when used outdoors, while the IP54 rating makes it suitable for exterior settings where dust and moisture are present. Its compact dimensions, with a width of 11 cm and depth of 14.5 cm, allow installation even where wall space is limited.

Bowery uses a replaceable bulb with a GU10 fitting, up to 50 W. The light source is not integrated, so you can choose the compatible bulb that best suits your lighting needs, within the stated power rating. The light therefore provides a practical solution for an entrance, outdoor passage or terrace wall without making the space feel heavy.

A discreet shape for outdoor lighting

The black structure pairs with light walls and textured surfaces, while also working well on dark façades or modern cladding. You can use the light on its own to mark a specific point or combine it with other fittings from the Bowery series for visual consistency along a path or across a façade. Before installation, consider the position of the electrical connection and leave enough space to insert the GU10 bulb.

The Maytoni Relax spotlight works with a 48V magnetic track system and provides a compact way to arrange lighting with precision and flexibility. Its black finish and clean profile suit contemporary layouts where the light point should complement the architecture without making the ceiling feel heavy.

With a diameter of 15 cm and a height of 7 cm, the product keeps compact proportions and can be used in modular lighting configurations. The 120° distribution widens the illuminated area, making the spotlight suitable for general or supporting light depending on the arrangement of the other elements on the track.

Light that follows the needs of the space

The colour temperature can be adjusted from 2700 to 6000 K, allowing you to move from a warm, welcoming tone to a more neutral and brighter light and choose the setting that suits the time of day or the function of the space. The 5 W power supports focused use, while the dimming function allows further adjustment of light intensity.

Relax suits spaces where the lighting configuration needs to change over time: living rooms, dining areas, kitchens, studies, commercial spaces and display areas. Integration with the magnetic track system allows you to plan several light points and rearrange them according to the furnishings or activity. Bluetooth Mesh control expands the management options compatible with the system, making light adjustment more practical.

Usage advice

Accessory for the Relax series, made of aluminium: it is compatible with products from the same series indicated by the manufacturer. Install the fitting while switched off and, where an electrical connection is involved, with the power supply disconnected.

Cleaning and maintenance

Carry out every intervention with the power switched off; use a soft cloth for dust. Do not use acidic or abrasive products on the metal, as they can damage the finish.

Wall lights are normally installed 160-180 cm above the floor; placed in pairs beside a mirror, they provide even light on the face. With an IP 54 rating, it is suitable for humid areas such as bathrooms or sheltered outdoor locations, away from direct water jets. It takes bulbs with a GU10 fitting, up to 50 W W each: using LED bulbs with the same colour temperature gives an even result. It is not dimmable: the intensity depends on the bulbs fitted. Installation must be carried out with the power switched off and, if you are inexperienced, by an electrician.

The Maytoni Relax spotlight works with a 48V magnetic track system and provides a compact way to arrange lighting with precision and flexibility. Its black finish and clean profile suit contemporary layouts where the light point should complement the architecture without making the ceiling feel heavy.

With a diameter of 15 cm and a height of 7 cm, the product keeps compact proportions and can be used in modular lighting configurations. The 120° distribution widens the illuminated area, making the spotlight suitable for general or supporting light depending on the arrangement of the other elements on the track.

Light that follows the needs of the space

The colour temperature can be adjusted from 2700 to 6000 K, allowing you to move from a warm, welcoming tone to a more neutral and brighter light and choose the setting that suits the time of day or the function of the space. The 5 W power supports focused use, while the dimming function allows further adjustment of light intensity.

Relax suits spaces where the lighting configuration needs to change over time: living rooms, dining areas, kitchens, studies, commercial spaces and display areas. Integration with the magnetic track system allows you to plan several light points and rearrange them according to the furnishings or activity. Bluetooth Mesh control expands the management options compatible with the system, making light adjustment more practical.

Usage advice

Accessory for the Relax series, made of aluminium: it is compatible with products from the same series indicated by the manufacturer. Install the fitting while switched off and, where an electrical connection is involved, with the power supply disconnected.

Cleaning and maintenance

Carry out every intervention with the power switched off; use a soft cloth for dust. Do not use acidic or abrasive products on the metal, as they can damage the finish.

Always work with the light switched off, cool and disconnected from the mains. Dust the metal with a dry cloth; avoid acidic or abrasive products that could damage the finish. Before changing a bulb, wait until it has cooled and do not exceed the maximum wattage shown on the label.

Frequently asked questions

What are the dimensions of the Bowery wall light?

The light is 11 cm wide and 14.5 cm deep. Before fitting, check the available wall space and the position of the electrical connection.

Which bulb does the Maytoni Bowery light use?

It uses a replaceable bulb with a GU10 fitting, up to 50 W. The light source is not integrated, so the bulb must be selected separately in the compatible format.

Where can I install this light and what type of light does it provide?

It can be installed outdoors at entrances, porches, on walls and along passageways. The light depends on the GU10 bulb fitted, allowing you to choose the colour temperature that suits the setting.